Screw vacuum pumps
Induvac supplies a range of dry screw pumps with capacities up to 800 m³/hour and suction pressures up to 0.01 mbar(a). These pumps are suitable for the continuous suction of dry and fully vapour-saturated air and gases.
Low vacuum and contact free compression
The contact-free compression makes the screw pump almost maintenance-free and very environmentally friendly. The pumps are optionally available with an internal coating. Due to the increasing demands in the field of environmental protection and energy reduction, the screw pump is in many cases a good alternative to the traditional liquid ring vacuum pump. The specific energy consumption is lower due to the absence of barrier fluid. In case of contamination with solid particles, additional inlet filtration is necessary. Induvac can advise you on this. Let Induvac investigate whether the dry screw pump is suitable for your process application!
Centralized vacuum cleaning systems
Aeration of water basins
Vacuum forming of plastic parts
Print & sign
Pick and place units
Systems for vacuum transport
Centralized vacuum systems
Pick & place applications by vacuum
Soil cleaning and water purification
Internal transport systems
Compressor for air paint set